Sony HT-A3000 Manual De Instrucciones página 20

Performing Initial
Settings
1
Press HOME on the remote control
supplied with the speaker system
to turn on the speaker system.
Operate the remote control by
pointing it toward the front of the
bar speaker.
2
Wait until [PLEASE WAIT] in the
front panel display disappears and
the next indication appears in the
front panel display.
3
Turn on the TV.
20
US
/// (up/
down/left/
right),
(enter)
HOME
PLEASE WAIT
4
Follow the instructions on the
screen displayed on the TV to
perform initial settings.
If the initial setting screen is not
displayed, use the TV remote control
to switch the input on the TV to the
HDMI input that is connected to the
speaker system, then press HOME
on the remote control of the speaker
system.
Initial settings screen
• Press /// (up/down/left/
right) and
item as instructed on the screen.
• If you use the optional subwoofer/
rear speakers, connect them by
following the instructions on the
[Checking Wireless Speaker
Connection] screen.
• Once [Setup is complete.] appears,
select [Learn more].
Note
Depending on the order in which you turn
on the TV and the speaker system, the
speaker system may be muted and
[MUTING] is displayed on the front panel
display of the speaker system. If this
happens, turn all devices off, then turn on
the speaker system after turning on the TV.
(enter) to select the