Publicidad
Idiomas disponibles
Idiomas disponibles
EN
rotisserie basket, let the end with gear towards left, block the grooves
on both end of the shaft into the rotating shelf.
11. Rotisserie Fork set
• The rotisserie fork set is used for roasting large meat or whole
chicken.
• Install a fork back words the gear on the shaft. Force shaft
lengthwise through meat/chicken in center. Install another fork
towards the meat/chicken. Slide both forks into meat/chicken and
adjust the meat/chicken to the middle of the shaft, then drive the
screws to lock the forks in position. You can adjust the forks closer
to the middle if needed but never outwards to the groove of both
ends.
Note: Make sure the meat or chicken is not too large to rotate freely
in the oven. Maximum 1KG.
• To install the rotisserie fork set, let the end with gear towards left,
block the grooves on both end of the shaft into the rotating shelf.
12. Fetch Tool
• Use to remove the rotisserie basket or fork set from the appliance.
• Place the fetch tool under the shaft at both side of the rotisserie
basket or fork set, then gently extract the rotisserie basket or fork set
out.
13. Rotisserie
• Rotisseries is used for kabob
• Same install ways for rotisserie basket.
BEFORE FIRST USE
Note: When using the appliance for the first time, carefully remove all
internal and external packaging, protective film and accessories.
• Clean the main unit with a damp cloth or sponge. Wipe dry with a
soft dry cloth.
Warning! Do not immerse the main unit in water or any other liquids
to clean.
• Wash the accessories with soapy water. Dry all components
8
thoroughly before use.
Warning! This is an oil-free fryer that works on hot air. Do not fill with
oil, frying fat or any other liquid. If these instructions are not followed
this may casue Fire and/or personal injury.
HOW TO USE THE CONTROL PANEL
1. Power Button
• Once the appliance is plugged in, the Power Button will light up and
the appliance is in standby mode.
• Touch the power button, the full control panel will be illuminated.
Choose the right preset or set the appliance manually, then touch the
power button to start cooking process.
• Touch the power button at any time during the cooking process, the
appliance will be stop working and will shut down, but the fan will
continue running for 20 seconds.
2. Internal Light
• With the help of the internal light, you can check the cooking
9
EN
Publicidad
