Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT:
Press and hold the accessory release
button while fitting or removing the tube
or accessories. Do not force any of the
components, as this could damage the
appliance.
DESCRIPTION
1. Vacuum cleaner body
2. Dust bin
3. Bin lid button
4. Bin release button
5. HEPA filter
6. HEPA filter enclosure
7. Metallic filter
8. Battery
9. ON/OFF button
10. Use/battery indicator
11. Wand
12. Accessory release button
13. Wand/accessory connection
14. Multi-surface motorized cleaner head
15. Socket
16. Rotating brush
17. Rotating brush release button
18. Upholstery brush
19. Crevice tool
20. Wall dock
21. Wall dock rear cover
22. Charger
23. Screws and dowels for the wall dock
20
INSTALLATION/ASSEMBLY
Remove all labels, stickers and tags except
the product nameplate.
Wall dock
The appliance has a wall dock, which should
be affixed to the wall.
Attach the wall dock as you see fit, using
dowels, screws, glue, etc.
Make sure that the dock can support at
least double the weight of the appliance.
Dock the appliance in the wall dock.
The appliance can be charged without
using the wall dock. To do so, unscrew the
rear cover of the wall dock and remove
the cable from the charger, which can be
directly connected to the vacuum cleaner.
Assembling the dust bin (Fig. 1)
Align the UNLOCK symbol on the dust bin
with the mark on the vacuum cleaner body.
Set the bin into the body.
Pressing and holding the bin release button,
turn the dust bin counterclockwise until
you hear a CLICK.
Assembling the battery (Fig. 2)
Insert the battery and make sure it is
securely attached.
Warning: New batteries are not fully
charged and should be charged completely
before using the appliance for the first time.
Charge the battery at room temperatures
between 4 and 40ºC (39-104ºF).
Connect the charger to a wall socket.
The time needed for a full charge is around
3 to 4 hours. Never overload the batteries
(only the first charge is recommended to be
done over 5 consecutive hours).
www.flama.pt
Publicidad
