Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Pairing the T-PL with the Heater
1.Double press the Pairing button on the SMART-R box
of the heater. The green pairing status LED will start
to flash and the heater is ready for pairing.
2.Plug the T-PL into an available mains socket and
switch it off using the power button.
shown on the display.
3.Long-press the pairing "P" button on the T-PL and the
letter "P" will flash on the display.
4.When pairing has completed successfully, the green
pairing status LED on the SMART-R box will become a
steady green and the letter "P" on the display will
disappear.
5.You should not experience any difficulty in pairing,
but in case you do, please ensure the T-PL and Heater
are within range of each other and try the above
process again.
6.Press the Power button on the T-PL to start using it to
control the heater.
T-PL Plugin Wifi Thermostat
ENGLISH
"OF" is
Publicidad
