Alesis MultiMix 4 USB FX Guia Del Usuario página 6

Operation
To set MultiMix 4 USB FX as your default playback
device, follow the directions below based on your
computer's operating system.
Windows:
1. Use the included USB cable to connect the MultiMix 4 USB FX to your computer. Press the power
switch to power on MultiMix 4 USB FX.
2. In the Taskbar, locate the Volume Control "speaker" icon. Right-click the speaker and select Playback
Devices.
Alternatively, go to Start Menu > Control Panel (or Settings > Control Panel in Classic View) >
Hardware and Sound > Sound.
3. In the Windows Sound control panel select the Playback tab and select USB Audio Codec* as the
default device.
4. Click the Recording tab and select USB Audio Codec* as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 Hz (CD Quality) as
the default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
macOS:
1. Use the included USB cable to connect the MultiMix 4 USB FX to your computer. Press the power
switch to power on MultiMix 4 USB FX.
2. Go to Applications > Utilities > Audio MIDI Setup.
3. In the Audio Devices window, select USB Audio Codec* in the left column.
4. Right-click USB Audio Codec*, and select Use this device for sound input.
5. Right-click USB Audio Codec*, and select Use this device for sound output.
6. Quit Audio MIDI Setup.
6
*If you have other USB audio devices
connected to your computer, which may have
identical names, you may need to try
selecting each one until the MultiMix 4 USB
FX is recognized.