Descargar Imprimir esta página

cecotec CHOPBEAT 1500 TITANBLACK GLASS Manual De Instrucciones página 32

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
ENGLISH
Assembly/Disassembly of the main/side blade. Fig. 6
- To assemble it, place the side blade on the main blade and turn it anticlockwise. Then,
remove its protective cover.
- To disassemble it, turn the side blade clockwise from the main unit.
- The blades are very sharp, handle them with care.
4. OPERATION
- The device has 2 speed levels and 2 blades.
- After assembling the device correctly, plug the device in and press the level I or level II
button. The device will start operating.
- We recommend using the first level for soft food (like vegetables) and level II for hard food
(like meat, carrots, bread or ice).
- When the user stops pressing the level I or level II button, the device will stop operating.
- Do not run the device for more than 30 seconds.
- When the blade stops spinning, move out the main unit and open the lid. Remove the
chopping blade and take out the food with a spatula.
- If the food is stuck on the bowl, switch the device off and unplug it. Then, use a spatula to
remove the stuck food and switch the device on again.
- If, after 30 seconds of operation, you are not getting the result you wanted, switch the
device off and wait for 2 minutes. Then, switch it on again.
Meat-mincing method
Choose between the first and second blade, or both. When the blade is assembled inside the
bowl, remove any bone the meat might before introducing it inside the bowl. Cut the food into
1-2 cm pieces and add them to the bowl. Do not exceed the mark on the bowl.
Fruits/vegetables-chopping method
Choose both blades. Install them in the bowl. Cut the vegetables and fruits to 1-2 cm pieces.
The length of the pieces should not exceed 2-3 cm. Do not exceed 4/5 of the bowl.
Warnings
- There are two marks on the sides of the blades. If the two marks are not aligned properly,
it means they are not correctly assembled. If you start operating the device with the blades
not on position, it may hurt the user.
- Before switching on the device place it on a flat surface.
32
CHOPBEAT 1500 TITANBLACK GLASS/STEEL/GLASS&STEEL

Publicidad

loading

Este manual también es adecuado para:

Chopbeat 1500 steelChopbeat 1500 glass&steel