COOLIFE H881 Guia Del Usuario página 29

4.Basic Operation
4.1.Switch to "ON","TEST" and "OFF" mode
When the camera is in the "TEST" mode
The camera can set parameters, check the camera, manually shoot and
view photos and videos, etc.
When the camera switch to "ON"
After having switched on the camera, the screen will display 15
seconds countdown. Then the LEDs and screen will be off. The camera
begins to operate independently and enter in the standby mode.
If wild animals enter the detection range of the motion sensors, the
camera will be activated and detect the motion trail.
If wild animals keep on moving in the detection zone of the sensor, the
camera will take photos or record video automatically.
When wild animals leave the detection zone of the sensors, the camera
will be deactivated and turn back in standby mode.
When the camera switch to "OFF" mode
The camera is completely turned off.
4.2.Adjust the best way of installation in Test mode
In test mode, you can work out the optimum exposure angle and the
range of the motion sensors.
During alignment, consider whether the use of the side motion sensors
may be useful for attaining the desired observation results. You can
activate/deactivate the side motion sensors using the described menu.
Basic Operation
25