Setup Menu and Functions
/【3648x2736P】/【3264x2448P】/【3072x2304P】/【2592x1944P】
/【2048x1536P】
Video Length
Set the length of each video clip recorded each time motion is detected
(between 3-60 seconds or 1-10 minutes). The longer the recording time
selected the shorter the operating time. The preset video length is 5
seconds.
Audio recording
Opening this function, you can record sound while recording video.
Shot lag
Set the time period that the camera should wait before reacting to
subsequent activation of the main sensor after the initial recording.
During the selected interval, the camera will not record any images or
videos. This prevents the memory card from being filled up with too
many files of the same event. You can select between 5-60 seconds or
1-60 minutes.
For example, if I set up a shot lag of 1 minute, it means that the
time between two consecutive records will be 1 minute no
recording even if the animal keeps on moving inside the detection
area, and the camera will restart to record after 1 minute.
Side motion sensors
The default setting is On. The two side PIR sensors provide a wider
sensing angle and accelerate the trigger to shoot. However, in some
situations, you have difficulty removing the interfering twigs or
avoiding the sunlight. If so, you have the option to turn off the side
28