Publicidad
Problems and Solutions
Problems
Analysis of causes
There are impurities in
Water outlet
the solenoid valve of the
does not stop
control box.
There are water drops
Sensing distance
on the surface of the
change shorter
induction window.
The battery is
exhausted.
Connecting wire of
No water
solenoid valve is loosed.
There is no signal
transmission in the
sensing area.
The hydro generator is
jammed.
The digital
display screen
does not display.
The power plug is short
circuited due to
humidity.
Display water
Short circuit of
temperature
temperature sensor plug
difference.
due to humidity.
Solutions
Warranty Time
According to supplier's
guidelines,closing the
angle valve, take the
solenoid valve out of the
control box and clean it as
page 7 operating
3 years
instructions
. If water is
still keeping flowing after
cleaning, please replace
solenoid valve of the
control box.
Wipe and dry
/
Change batteries
/
Connect connecting wire of
/
the solenoid valve.
Replace parts
in the
5 years
sensing area.
Clean the sundries on the
impeller of hydraulic
generator.
Drying digital display
screen and connection plug
of hydropower generator.
1 to 2 years
Drying digital display
screen and connection plug
of hydropower generator.
Attention
Before using,
please must
open the angle
valve to let the
impurities flow
out.
/
/
/
Operating
ambient
temperature:
0-55
Pay attention
to the purity
of the water.
8
Publicidad
