AQV OK770 Manual De Instrucciones página 17

once the camera detects a vibration, it will automatically
lock the current video. The locked video will not be covered
automatically. We suggest you set it to "low", so that the
video will only be locked when the vehicle is shaking
violently and no memory will be wasted.)
5. Recording Time: The length of time currently being
recorded.
6. Resolution: This symbol shows the current resolution.
You can press MENU button to enter the menu and set the
desired resolution.
7. Memory Card Status: This symbol means that the
device already has a memory card.
8. Power Status: This symbol means that the device is
switched on. The device cannot be charged because it has
no battery and cannot store power. This dash cam only has
a super capacitor that is used to power the device.
9. Time & Date: This time represents the time of the current
location. You need to press MENU button to enter the menu
1.3 Setup Initial
and make the setting. (As explained in
Menu)
10. Audio Status: This symbol means that the current
recording is recording audio. You can press DOWN button
to turn it off/on, but this setting will not be saved after turning
off the camera. You can press MENU button to set it
permanently. This symbol means the Record Audio is off.
11. Exposure: Exposure compensation is used to alter
exposure from the value selected by the camera, making
photographs brighter or darker. You can press MENU button
to enter the selection of the exposure comp, then press UP
or DOWN button to choose the EV value.
12