Publicidad
Idiomas disponibles
Idiomas disponibles
To mount the soundbar on a wall, proceed as follows:
Drill two parallel holes in the wall.
To do so, use an appropriate drill bit for the respective surface (dia. 5.5-6 mm,
depending on the wall construction). The holes are to be spaced 606 mm apart
(A).
Push a dowel into each drilled hole as required.
Screw both wall mountings supplied into the wall.
Ensure that the openings for hanging the soundbar point upwards (B).
Loosen and remove the screws on the fixing points on the back of the soundbar.
Replace the previously removed screws with the supplied wall mounting screws
and screw these into the fixing points (C).
Attach the soundbar in the mounting holes on the wall mounts using the wall
mounting screws (D).
A
C
50
606 mm
B
D
Publicidad
