Publicidad
Idiomas disponibles
Idiomas disponibles
Scenario 2: Reyee Mesh
①
Place the second router within 2 meters of the first one, and power it on.
After the system status indicator blinks in blue, wait for 2 to 3 minutes until it turns into steady blue. (If the router
has been configured before, please press the Reset Button for more than 3 seconds to restore the factory settings)
②
Press the Reyee Mesh button on the first router.
Press the Reyee Mesh button on the first router, and its indicator will blink in green during searching for routers. The
indicator on the second router will also blink in green slowly during paring. After 2 minutes, as the indicators on both
routers turn into steady green, the pairing succeeds.
Modem
③
Place the second router to the specified position and power it on.
After powering the router, wait for 3 to 5 minutes until the Reyee Mesh indicator turns into steady blue, it is all set and
you can access the Internet. The meshed routers will share the same SSID and password. Visit 192.168.110.1 to
check router connecting condition.
If there is any network port available, you can connect cables as shown below. The wired connection is more stable.
Please note that Wi-Fi signal may be weak if two routers are placed far from each other or there are several obstacles like wal ls
between them.
The Internet speed may be slow if there are multiple paired routers. We recommended mesh-up within 5 routers (1+4) to keep good performance.
Press the Reyee Button
(All devices within 2 meters)
1
LAN
Internet
1
It doesn't matter whether you press Reyee
Mesh button on the second router or not
2
4
2
WAN
Publicidad
