Descargar Imprimir esta página

Livoo TES251 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
Signal to noise ratio
Weight
Drawing of the device
Figure 1 - bottom of the unit. Figure 2 - back of the device.
Figure 1
1.
ON/OFF" button
2. « M » mode button
3. Back button
4. Play/Pause button
5. Skip to next button
Use of the device
Charging the battery
Fully charge the battery with the supplied USB cable before first use. Insert the micro USB tip of the
charging cable into the micro-USB socket on the speaker and plug it into a USB port (computer, AC
charger, car charger, etc.).
While charging, a red light will illuminate.
When the battery is full, the red light will turn off.
Turning the device on or off and changing functions
Press and hold the ON/OFF button to turn your device on and off.
Press and hold the M button to change the function: TF card, USB, Aux, Bluetooth.
Pairing the speaker via Bluetooth
Your speaker goes directly to Bluetooth® mode when there is no TF card, AUX or USB cable connected.
When any of these are connected, press the M button to switch to Bluetooth® mode and activate this
function. Then open the Bluetooth® setting on your phone, tablet or other Bluetooth® audio device and
select the "TES251" device that appears in the list. Pairing is now complete.
The device will automatically connect to the last connected Bluetooth® device if it is active and within
the required transmission range.
Display different LED colors
The device automatically switches to "diffuse light" mode when it is switched on. In this mode, the colours
are switched one after the other.
Briefly press the ON/OFF button again to switch to the next LED display mode.
In this mode, the colour changes and responds to the tempo of the music. Without music in this mode,
the LED light does not light up. Press the ON/OFF button again to switch back to diffused light mode. Press
the ON/OFF button again to switch to the next mode. The unit will remain on the selected colour. Pressing
the ON/OFF button again briefly will cycle through all the colours offered by the fixture until you return to
the "diffuse light" mode.
Briefly press the ON/OFF button twice to switch off the LED light.
Playing music
Select a compatible media on your phone, tablet or other Bluetooth® audio device.
Briefly press the play button to start or pause music.
Briefly press the or Button to go to the previous or next song.
95dB
378g
Figure 2
6. USB input
7. AUX input
8. Micro-USB charging input
9. TF card input
www.livoo.fr
Listenning time on battery
(50% volume)
Charging time
4-5h
3-4h

Publicidad

loading

Productos relacionados para Livoo TES251