Sunbeam GCSBCL-417-000 Manual De Instrucciones página 3

DESCRIPTION OF THE APPLIANCE
1: Soleplate
2: Spray nozzle
3: Water reservoir Lid
4: Steam select Lever
5: Shot of steam button
6: 360º Swivel cord
GCSBCL-417-000_20ESM1 (US).indd 4-5
7: Handle
8: Wide heel rest
9: ON/OFF Indicator Light
10: Spray trigger
11: Temperature Control Dial
12: See- Trough Water Reservoir
-4-
BEFORE FIRST USE
• When using the Iron for the first time, test it on a piece of old cloth to be sure
that the Soleplate and the Water reservoir are clean.
• It is possible that the Iron will discharge some smoke or give off a slight odor
during it is first usage. This is due to the initial heating of the materials used.
This is completely normal and will stop shortly afterwards.
• When not ironing, always have the Steam Select Switch turned to the close
position .
•
INSTRUCTIONS FOR USE
CHOOSING THE RIGHT WATER
• This Steam iron may be used by normal tap water. However, if the water if the
region in which you live is especially hard, it is recommended to use distilled
water to prolong the life of your iron.
• Do not use water that has been desalinated with chemicals.
INSTRUCTIONS FOR USE
1. Turn off the Iron and disconnect the plug from
the electrical wall outlet before filling the Iron with
water.
2. Turn the Steam Select Switch to the closed position.
3. Set the Iron in the position indicated below (figure
2) and fill it with water, no higher than the Max fill
level shown on the See-Through Water Window.
figure 2
-5-
10/26/20 4:19 PM