Safety Label; Restriction Of Use - Epson TM-P60II Manual Del Usuario

Otherwise fire or explosion may occur.
Should any battery liquid get on skin or clothing, promptly wash it off with clean
water. If you do not, the liquid may damage your skin.
Do not expose the battery to water. Do not allow water to contact the terminals. This
may cause fire, overheating, or electric shock.

Safety Label

The caution label on the product indicates the following precaution.
CAUTION:
During printing or after printing, the thermal head can be very hot.

Restriction of Use

When this product is used for applications requiring high reliability/safety, such
as transportation devices related to aviation, rail, marine, automotive, etc.;
disaster prevention devices; various safety devices, etc.; or functional/precision
devices, etc.; you should use this product only after giving consideration to
including fail-safes and redundancies into your design to maintain safety and
total system reliability. Because this product was not intended for use in
applications requiring extremely high reliability/safety, such as aerospace
equipment, main communication equipment, nuclear power control equipment,
or medical equipment related to direct medical care, etc., please make your own
judgment on this product's suitability after a full evaluation.
Notes on Use
❏
The printer does not operate with only the AC adapter. Always install the
enclosed battery OT-BY60II in the printer even when using the AC adapter.
❏
Be sure to use the power switch to turn the printer on and off.
❏
To communicate with a computer via a USB cable, connect the cable before
turning on the printer.
❏
To use the USB cable, it is recommended to secure it to avoid stress on it.
❏
Be sure not to open the roll paper cover when the printer is operating.
❏
Protect the printer from impact.
❏
Do not apply excessive force to the printer case.
❏
Do not place food or beverages such as coffee on the case of the printer.
❏
For Bluetooth interface models, when the wireless connection is ended while the
printer is offline, reconnection may not be possible. In such case, remove the cause
of offline and reconnect it.
❏
For Bluetooth interface models, if you establish a radio connection between the
host computer and the printer each time you start printing instead of maintaining
the connection, it may take a while between the time you send a print job and the
time that the printer actually starts printing. This happens because connecting the
host computer and the printer requires some time. The time required for
connection depends on the operating environment.
For American Users
WARNING:
The cords included with this product contain chemicals, including lead,
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling. (This notice is provided in
accordance with Proposition 65 in Cal. Health & Safety Code §25249.5 and
following.
TM-P60II User's Manual 3
English