TECshow BEAMER 230 Manual De Usuario página 6

power cord to the appropriate wall outlet.
Clamp Mounting: The Beamer 230 provides a
unique mounting bracket assembly that integrates
the bottom of the base, the included "Omega
Bracket," and the safety cable rigging point
in one unit (see the illustration below). When
mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega
bracket using a M10 screw fitted through the center
hole of the "omega bracket". As an added safety
measure be sure to attached at least one properly
1. Omgea Bracket
2. Safety Clamp
3. Safety Cable
4. 1/4 Turn Quick-Lock Fasteners
P. 6
Tecshow Beamer 230 | English version
rated safety cable to the fixture using on of the
safety cable rigging point integrated in the base
assembly.
Regardless of the rigging option you choose for
your Beamer 230 , always be sure to secure your
fixture with a safety cable. The fixture provides
a built-in rigging point for a safety cable on the
hanging bracket as illustrated above. Be sure to
only use the designated rigging point for the safety
cable and never secure a safety cable to a carrying
handle.