JAROLIFT TDRC08W Instrucciones Originales página 19

ADD / COPY WALL TRANSMITTER - TDRC08W / TDRC16W
The example shown is exemplary and depends on the respective receiver type. Please follow the instructions of the
receiver!
NOTE!
The TDEF radio motors and the external TDR receivers can be controlled with several handheld and wall trans-
mitters. This enables, for example, individual and group control of the motor with a TDRC08W as well as
simultaneous group and timer control with another hand-held or wall-mounted transmitter with timer function
(e.g. TDRCT04 or TDRCT04W).
For details, please refer to the respective instructions for the TDEF radio motors and TDR radio receivers.
To teach-in additional hand-held or wall transmitters to a radio motor or radio receiver, you need a hand-held or wall transmit-
ter that has already been taught-in (see "Initial programming").
Programming example - adding a TDRC16W
1. Select a taught-in channel on a transmitter that has already been taught in.
2. Select a desired channel on the new transmitter to be learned.
3. Press the UP and DOWN buttons simultaneously on the transmitter that has already been tuned in.
4. Then press the STOP button 8 times - also on the already taught-in transmitter.
5. The motor will vibrate briefly to confirm.
6. Within 10 seconds, press the UP and DOWN buttons simultaneously on the new transmitter to be taught-in. .
7. Then briefly press the STOP button on the transmitter to be reprogrammed.
The engine will vibrate again briefly to confirm. The wall transmitter code has been copied to the new transmitter.
copied to the new transmitter.
Transmitter already taught-
in:
A taught-in
A taught-in chan-
nel with the
buttons K1 or K3
buttons.
M
Engine vibrates.
New transmitter to be
taught:
Desired channel
with the K1 or K3
buttons Select
channel.
New transmitter to be
taught:
Up and down
button
simultaneously
press.
Transmitter already taught-
in:
Press the up and
down buttons
simultaneously.
New transmitter to be
taught:
Stop - Press the
key.
PROGRAMMING
Transmitter already taught-
in:
Press the stop
button 8 times.
M
Engine vibrates.
19