Diamond SALOON 350 Q-R-G Instalación Y Uso página 7

Operator's guide:
1)Unpacking instructions
2)The handles
3)Round glass shelving
I
4)Square glass shelving
5)Grid shelves
UK
6)Internal cleaning
7)External cleaning
D
8)Connection to the mains
9)Controls
E
! WARNINGS
F
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
NL
1. Adults should operate this appliance only. Do not allow children to use the controls or play with it. 2
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
P installation of the appliance should be carried out by a qualified electrician or other competent person.
4 . Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
S
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs. 6
7 . The manufacturers of this appliance accept no responsibility for the consequences of misuse in
DK
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice.8
FIN
sources of heat, such as radiators, stoves, etc.
least 30 cm.
B
12 . If damp air or products to be refrigerated should cause ice to form on the evaporator, we recommend
stopping the compressor and placing the goods in special refrigerated containers, kept at the same
GR
temperature, until defrosting is completed;if this is not carried out the compressor will continue to operate
leading to a wasteful consumption of electricity and poor performance.
and unused, it is indispensable to keep the door open at least 10 cm.
CZ
EE
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGE 1a
LV
Remove the nails from the wooden crate with care.
3. Insert the forks of a forklift truck between appliance and pallet or crate.
LT
the pallet or crate.
the package before disposal.
H
2. THE HANDLES
1 . The handles can be found in a bag inside the appliance.
M using the two screws already inserted in the holes. Tighten with care. . Place the plastic insert over the
handle and press down until it clicks into place (see figure 2).
3. ROUND GLASS SHELVING
PL
1. These shelves, which can be found in the cardboard box, should be slid into the supports on the
special posts. Fit the bottom mirror shelf first. . Secure the shelves in place using the screws you will find
SK
in the bag, with the plastic part facing the glass. Tighten with care (see figure 3).
4. SQUARE GLASS SHELVING
SLO
1. The brackets can be found in the bag, together with the suckers (4 per shelf).
brackets, pressing the head firmly into the holes (A).
(B) and pressing down (C).
insert the mirror shelf at the bottom.
press down firmly (see figure 4).
5. GRID SHELVES
1. The brackets are in a bag inside the cabinet.
and pressing down (C). . Lay the grid shelves, which can be found in the cardboard box, on the
brackets, placing the raised edge opposite to the door (see figure 5).
6. INTERNAL CLEANING
1. Clean the inside parts and glass panels with a soft cloth and neutral detergents.
7. EXTERNAL CLEANING
1 . Use the same products as used for the internal cleaning.
of the panel and the grilles (see figure 6).
5
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance near
11 .Ensure that the products displayed on the shelves and grills do not hang over the edges.
Cut the strap and lift up the cardboard package.
6. Place the appliance on a flat and level surface. . Make sure there is nothing left in
8. Separate the packaging materials to facilitate disposal (see figure 1).
R model
model Q
4. Place the shelves you will find in the cardboard box on the brackets. . First
. Place the other shelves on top of the dampened suckers and
6
Model G
3
Operator's guide
10)Checking correct operation before use
11)Internal cleaning
12)Replacing the internal lights
13)Replacing the door's magnetic gasket
Maintenance manual (Page 48):
1)Cleaning the condenser
2)Cleaning the evaporator
3)Replacing a glass panel
4)Wiring diagram diagram of refrigeration unit
10 . Keep the ventilation grills free from obstruction for at
2. Take out the box containing the shelves (fragile!).
2. Fix the handle base to the door frame
2
3. F ix the brackets, inserting the hooks into the slots
2. Fix the brackets, inserting the hooks into the slots (B)
2. Remove the protection from the steel parts
6
3
9
13 . If the appliance is not working
WOODEN CRATE 1b
4. Lift the appliance. . Remove
7
3
2. Fix the suckers to the
2. Dry with a soft cloth.
. It
5
5