Comfee GLACE 8C Manual De Instrucciones página 44

Installation
Part Description
Unit Adaptor
Exhaust Hose
Window Slider Adaptor
Wall Exhaust Adaptor A
(only for wall installation)
Wall Exhaust Adaptor B(with cap)
(only for wall installation)
Screw and anchor
*
(only for wall installation)
Window Slider A
Window Slider B
NOTE: Items with
Window Installation Kit
Step One: Preparing the Exhaust Hose assembly
Press the exhaust hose into the window slider adaptor
and unit adaptor, clamp automatically by elastic buckles
of the adaptors.
Step Two: Install the Exhaust hose assembly to the unit
Push the Exhaust hose into the airoutlet opening of the unit along the
arrow direction.
Step Three: Preparing the Adjustable Window Slider
1. Depending on the size of your window, adjust the size of the
window slider.
2. If the length of the window requires two window sliders, use the bolt
to fasten the window sliders once they are adjusted to the proper
length.
3. For some models, if the length of the window requires three window
sliders(optional), use two bolts to fasten the window sliders once they
are adjusted to proper length.
Quantity
1 pc
1 pc
1 pc
1 pc
1 pc
4 set
1 pc
1 pc
are optional. Slight variations in design may occur.
*
Part
*
Security Bracket and Screw
*
*
*
*
Exhaust hose
Press into
Unit adaptor
Window slider A
10
EN
Description
Bolt
Drain Hose
Foam Seal C (Non-adhesive)
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Remote Controller
and Battery
Exhaust hose
assembly
Press into
Window slider
adaptor
Bolt
Window slider B
Quantity
1 pc
1 set
1 pc
1 pc
2 pc
2 pc
1 set