Publicidad
Idiomas disponibles
Idiomas disponibles
How to Assemble Your Ceiling Fan Blades and Switch
Housing (Continued)
8.
Remove one of the three screws in the support
bracket. Slightly loosen the remaining two screws.
Assemble the adapter assembly to the housing
support bracket using the two key slots in the adapter
assembly. Replace the third screw and securely
tighten all three screws. (Figure 5)
9.
Assemble the adapter assembly on the housing
support bracket and tighten three screws. Securely
attach the 9-pin switch cup connector to wiring
harness socket within adapter assembly. (Figure 6)
WARNING
The color label on these two connectors must
correspond to each other.
10.
Assemble the housing switch cup onto the
assembled adapter with three screws. (Figure 7)
11.
Install the fan fob and pull chain coupler. (Figure 8)
12.
Restore power and your fan is now wired to be
turned on and off from the fan pull chain speed control.
Adapter
Assembly
Fan Fob
Pull Chain Coupler
13
Screws (3)
Figure 5
Figure 6
Figure 7
Fan Fob
Pull Chain
Figure 8
Coupler
HARDWARE USED:
X 1
X 1
Publicidad
