Publicidad
Idiomas disponibles
Idiomas disponibles
• Choose Parameter setting knob enter into pulse
frequency parameter setting to adjust pulse
frequency.
• Choose Parameter setting knob enter into duty
cycle parameter setting to adjust duty cycle.
• Choose Parameter setting knob enter into cur-
rent increasing time parameter setting to adjust
increasing time
• Choose Parameter setting knob enter into cur-
rent decreasing time parameter setting to adjust
decreasing time
• Choose Parameter setting knob enter into Post
fl ow Time parameter setting to adjust Post fl ow
Time.
Complete Set list
• TIG 200S PULSE inverter TIG welder: 1Piece
• Operator's Manual: 1 Piece
Accessories – easy-broken parts
• TIG welding torch: 1Piece
• Pottery muzzle: 1piece in the welding torch） 3
Pcs
• Tungsten electrode holder (1piece in the welding
torch): 3 Pcs
• Electrode pressing cap (1piece in the welding
torch): Long/short each 1 Piece
• Earthing cable (with earthing clamp): 1 Piece
Note:
a). No guarantee for the easy-broken parts
b). If purchasing contract additionally agreed, the
contract will be prior.
Delivery and Storage
• This series welders are base structure and should
be delivered by fork vehicle or salver.
Before delivery, fi x the welder well.
Note: forbid to deliver the welder by handles
• During the delivery and storage, avoid rain or
snow aff ects to the welders. Notice the warning
information on the cartons in loading. Make sure
the welder storage dry, ventilation, without caus-
tic gas or dust, temperature between -25 ∼ +
55°C, relevant humidity no more than 90%.
• If the welders need to be stored after the carton
already unpacked, repack as the old package
demands (clean, dry and covered with plastic
bag before storage)
• Keep well the cartons, quakeproof blocks, got in
purchasing time, for the long distance delivery.
26
If long distance delivery needed, pack with
wooden case and make the "UPPER", "Rain
Proof" sign.
Service, Maintenance,
Transportation and Storage
The welder needs regular maintenance as following:
Periodically clean dust, dirt, grease, etc. from your
welder. Every six months, or when necessary, remove
the welder cover panel and air-blow any dust and
dirt that may have accumulated inside the welder.
Replace power cord, ground cable, ground clamp,
or electrode assembly when damaged or worn.
MINOR AND ROUTINE MAINTENANCE
Store in a clean dry facility, free from corro-
sive gas, excess dust and high humidity. Temperature
range should be -12°C to +50°C and the relative
humidity not more than 90%.
When transporting or storing the welder after use,
it is recommended to repack the product as it was
received in order to protect it. (Cleaning is required
before storage and you need to seal the plastic bag
in the cardboard box before storage).
Guarantee
For this Würth power tool, we provide a guarantee
in accordance with the legal/country-specifi c regu-
lations from the date of purchase (verifi ed by invoice
or delivery document). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is
sent undisassembled to a Würth branch offi ce, your
Würth sales representative or a customer service
agent for Würth power tools.
Disposal
The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
Do not dispose of power tools
into household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU,
power tools that are no longer usable, and accord-
ing to the European Guideline 2006/66/EC,
Publicidad
