MANUAL DEL PROPIETARIO | GUÍA DE MONTAJE
ASSeMBlY INSTRUCTIoNS
TOOL NEEDED:
TOOLS NEEDED:
Find a large, clean area to assemble your appliance�
Phillips head screwdriver
Phillips head screwdriver &
Remove all packing material before assembling�
Adjustable wrench
Sharp edges. Wear gloves while assembling.
NOT INCLUDED:
NOT INCLUDED:
lPG cylinder
lPG cylinder
9 kg)
9 kg)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
o o
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
Con la ayuda de otra persona, retire el cuerpo de la plancha del
PASO 01
empaque y colóquelo boca abajo sobre una superficie lisa y plana�
desenganche y despliegue las patas a su posición vertical, luego use dos (2)
tornillos de mariposa pequeños para sujetar las ruedas fijas a los extremos del
ensamblaje de la pata derecha�
Utilice dos (2) tuercas ciegas y dos (2) arandelas elásticas para unir las dos (2)
ruedas giratorias al conjunto de la pata izquierda� (Asegúrese de que las ruedas
giratorias estén bloqueadas)�
NOT INCLUDED:
NOT INCLUDED:
22" griddle base
17" griddle base
06
TOOL NEEDED:
TOOL NEEDED:
Adjustable wrench
Phillips head screwdriver
CAUTIoN
NOT INCLUDED:
NOT INCLUDED:
lPG cylinder
AA battery
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOT INCLUDED:
22" griddle base
empuje para
empuje para
bloquear
bloquear
TOOL NEEDED:
TOOL NEEDED:
5mm Allen wrench
Adjustable wrench
Heavy pieces. Two people should assemble this appliance.
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
ELECTRIC REQUIREMENTS:
NOT INCLUDED:
TOOLS NEEDED:
120V 60Hz
AA battery
Phillips head screwdriver &
Adjustable wrench
Coloque el estante inferior entre los ensamblajes de las patas� Use
PASO 02
un (1) tornillo de mano grande para asegurar el estante al ensamblaje de la
pata derecha�
Use un (1) tornillo de mariposa mediano para sujetar el soporte de GlP y
asegurar el estante al ensamblaje de la pata izquierda�
NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
lPG cylinder must include collar to
lPG cylinder must include collar to
protect lPG cylinder valve.
protect lPG cylinder valve.
NOT INCLUDED:
17" griddle base
Modelo: 2151
TOOL NEEDED:
5mm Allen wrench
CAUTIoN
NOTICE
ELECTRIC REQUIREMENTS:
TOOL NEEDED:
Phillips head screwdriver
120V 60Hz
NOT INCLUDED:
AAA battery
NOT INCLUDED:
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
NOT INCLUDED:
BLACKSTONEPRODUCTS.COM/SUPPORT
22" griddle base
Plac
surfa
DO N
cook
TOOL N
Adjust
NOT IN
AA bat