Cameo OTOS SP6 Manual De Usuario página 17

Information on the submenu items in the DMX menu and the corresponding setting options can be
found in the table below (select with  and confirm with ENTER, change value or status with
 and  confirm with ENTER).
DMX
DMX Address 001 - 4xx
33CH Basic
Mode 36CH Standard
50CH Extended
Off
W-DMX Trans-
On
mitter
Force to pair
Unlink All
OPERATION VIA W-DMX
Starting from the main display, press MENU to enter the main menu. Using  and , select the
Control menu and press ENTER. Now select the menu item W-DMX and confirm again.
For information on the submenu items in the W-DMX menu and the corresponding setting options,
see the table below (select with  and  confirm with ENTER, change value or status with 
and  confirm with ENTER).
W-DMX
DMX Address 001 - 4xx
33CH Basic
Mode 36CH Standard
50CH Extended
Setting the DMX start address
Selecting the DMX mode
Deactivate sending of the DMX control signal via
W-DMX
Activate DMX control signal forwarding via W-DMX
Pairing with ready-to-pair W-DMX devices
Disconnect all W-DMX connections
Setting the DMX start address
Selecting the DMX mode
17