Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance & Cleaning
English
Cleaning and assembly of the door
1. Open the door fully by pulling it towards you. Then unlock it by pulling the upper hinge lock with the
help of a screwdriver as shown in figure 1.
2. Place the hinge lock at the highest angle, as shown in figure 2. Place the two hinges that connect the
door to the oven in the same position.
3. Subsequently, close the door so that it is positioned so that it is in contact with the hinge lock, as
shown in figure 3.
4. To easily remove the oven door, when approaching the closed position, grasp the lid with both hands
as shown in figure 4 and pull upwards.
Do the same as you did in reverse order while opening the door to replace the oven door.
Cleaning the oven glass
Lift it up by pressing the plastic parts on the left and right sides as shown in figure 10 and pull it towards
you as shown in figure 11. The glass will come off after removing the part as shown in figure 12. Remove
the glass that has come loose by carefully pulling it towards you. Attach the outer pane to the oven door
profile. After removing the glass panes, you can easily wash them. Once cleaning and maintenance is
complete, you can replace the glass panes by following the same steps in the same order.
The glass panes can be replaced in reverse order after cleaning and maintenance. Make sure that the
profile is correctly in place.
10
11
12
51
infiniton.es
Publicidad
