Publicidad
Preparing the Camera
location carefully for its suitability for the plugs. The assembly
material used must be suitable for the respective location. If in doubt,
consult a professional.
Steps
♦Mark the drill holes by holding the foot of the wall bracket at the
desired mounting location and marking the hole positions.
♦Use a drill with a6 mm drill bit to drill the required holes and insert
the plugs and insert the wall plugs flush with the wall.
♦Screw the wall bracket to the wall using the supplied screws.
♦Mount the camera on the tripod screw and screw the camera a little
way on (about three turns).
♦Turn the camera in the desired direction and lock it with the lock nut.
♦To move the camera into its final position, undo the two pivot bolts a
little, position the camera, and fix the position by tightening the two
pivot bolts through the hexagonal screw.
14
Publicidad
