Connecting The Breastmilk Expression Set; Connecting For Single Pumping - Lansinoh Signature Pro Instrucciones De Uso

4.2 Connecting the Breastmilk Expression Set

Once Breastmilk Expression Set is assembled, connect to pump base:
1. Secure one end of 600 mm 2. Secure other end of 600 mm tubing
tubing to Tubing Y Connector. firmly to the pump connector.
3. Insert pump connector into opening on
left side of pump.

4.3 Connecting for Single Pumping

1. Remove one of the 300 mm 2. Secure plug into open outlet of
tubing from the Tubing Y Connector. Tubing Y Connector.
11