Descargar Imprimir esta página

Lippert Components 12588 Serie Instalación página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Adjusting the Television Position
• The power cord of the television shall not be pinched between moving parts.
• Check the power cord position before moving the television.
The product is equipped with an opening lever to unlock and lock the product movement.
1.
Operate the opening lever.
2.
Pull out the product completely. The open position is reached when the guide rails are locked in place.
The product is equipped with a spring pivot to block the rotation of the support bracket.
1.
Pull out the spring pivot.
2.
Adjust the rotation of the television.
When the television is not in use:
1.
Turn the support bracket. The spring pivot snaps and locks the support bracket in secure position.
2.
Close the product. The opening lever snaps and locks the product in secure position.
Maintenance
• Keep the product clean and efficient.
• Lubricate and grease moving parts when necessary.
• Remove any objects or elements that may hinder one or more movements of the television.
• Replace worn or damaged parts.
• Use only original spare parts.
• If necessary, contact competent installing or repairing technicians.
Warranty
The Manufacturer warrants the products for 24 months.
The warranty does not cover damage due to:
• tampering with the product and/or its components
• use and/or installation and/or maintenance carried out in such a way being non-compliant with what is
established in these instructions
• incorrect connection of the electronic control units (in case of electrically-operated products).
In such cases, the repair will be charged.
Where the warranty is applicable, the Manufacturer will decide, at their own discretion, whether to replace
the product or to have it repaired, possibly including the replacement of its components. The work under
warranty will be carried out at the headquarters of the Manufacturer or one of its Service Centers, unless
otherwise expressly agreed.
If not previously agreed with the Manufacturer, the following elements are excluded from the warranty:
• the shipping costs of spare parts
• costs for labor relating to work carried out at retailers
• any other costs.
Compensation for indirect damages is excluded.
Rev: 11.22.22
Page 7
EN
CCD-0005297

Publicidad

loading

Productos relacionados para Lippert Components 12588 Serie