Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Stick Vacuum
USER INSTRUCTIONS
HOW TO USE AS AN UPRIGHT VACUUM
1.
Make sure the Stick Vacuum is turned off and unplugged during
assembly. Once the Stick Vacuum is assembled, make sure the HEPA
filter is in place.
2.
Plug the power cord into a power outlet.
3.
Press the ON ( I ) switch, on the front of the main body near the top
to turn the vacuum ON.
4.
Press the OFF (0) switch to turn the vacuum OFF.
5.
Unplug the power cord after each use.
HOW TO USE AS A HAND HELD VACUUM
1.
Make sure the Stick Vacuum is turned off and unplugged.
2.
Make sure the HEPA filter is in place.
3.
Make sure power cord is unwound from handle install lever.
4.
Pull handle install lever to remove handle with pole from main body.
5.
Gently pull on floor tool to remove from the dust collection box.
6.
Insert the suction brush or crevice tool into the air inlet hole on the
dust collection box.
7.
Press the ON ( I ) switch, on the front of the main body near the top
to turn the Hand Held Vacuum ON.
8.
Press the OFF (0) switch to turn the Hand Held Vacuum OFF.
9.
Unplug the power cord after each use.
HOW TO USE THE ACCESSORIES
1.
Crevice tool is used for cleaning radiators, corners, edges, drawers.
2.
Suction brush is used for cleaning curtains, shelves, lamps and other
delicate objects.
3.
Floor tool is used for cleaning carpet and floors.
AFTER SALES SUPPORT
866 558 8096
User Instructions
7
service@801service.net
Publicidad
Capítulos
Tabla de contenido
