ledscom LC-EL-099 Instrucciones De Montaje página 5

1. Disconnect the building-side connecting
cable from the power supply and secure it
against being switched on again. To do
this, trip the corresponding circuit breaker
of the house installation.
2. Drill an installation hole with a diameter
between 70 mm and 90 mm using a hole
saw. Care must be taken to ensure that
existing lines are not damaged.
3. Connect the wires of the light according
to "Figure 2". The cores of the connecting
cable must be rigid for this and are simply
pressed into the opening.
4. Now place the recessed luminaire in the
opening. The retaining springs should now
fix them automatically.
5. The installation is now complete. To put
the lamp into operation, choose any E27
bulb and insert it into the porcelain socket.
Subject to technical changes
LEDs Com GmbH, Dohrweg 2a, D-41066 Mönchengladbach, www.leds-com.de, Tel. +49 (0) 2161 - 5 75 99 76
English
Figure 1
Figure 2
Recessed ceiling light (LC-EL-099) - Assembly instructions
03/2023