Energeeks EG-S002 Guía De Instalación Rápida página 23

Front
Front
Inner: Anti-sabotage button, main switch, connection button.
Back: Holes for installation, anti-tamper button, speaker.
2. Quick install guide
•
Remove the siren shell to access the inner. To do this,
you must remove the screw located at the bottom.
•
Connect the siren to power and turn on the main switch.
•
Press the connection button, a short press will turn on
the LEDs, when the LEDs remain on the siren is waiting
for the connection with the alarm equipment.
•
While the siren waits for pairing, trigger the alarm by
arming it and acting on a sensor, or simply with the SOS
button, from either the alarm panel, the remote control
or the application.
•
Upon detecting the alarm jump, the siren is linked to
the device; disarm the system to stop the alarm.
Inner
23
Back