Stiebel Eltron WPM Guía Rápida página 8

BrieF guide
What operating modes are there?
On the start screen, select the operating mode of the heating system via the Touch-Wheel and activate with "OK".
Operating mode Function
Standby mode The heat pump is switched off. The frost protection function is active.
Programmed mode (rec- The heat pump covers the heat demand specified by the set programs. Times can be stored for the pro-
ommended setting) grams (see next section). During these times, the heat pump operates at different set temperatures. No
times are stored at the factory. The heat pump heats to comfort temperature.
To reduce the energy demand, the programs can be used to determine when the set temperatures are low-
ered.
Example: The heating program determines that the heat pump heats to comfort temperature during the
periods 06:00 to 08:00 and 15:00 to 22:00. Between these times, the heat pump heats to ECO temperature.
Comfort mode The heat pump heats to comfort temperature as long as the operating mode is selected.
The DHW is heated to comfort or ECO temperature depending on the times set in the DHW program.
ECO mode The heat pump heats to ECO temperature as long as the operating mode is selected.
The DHW is heated to comfort or ECO temperature depending on the times set in the DHW program.
DHW mode The DHW is heated to comfort or ECO temperature depending on the times set in the DHW program.
The heat pump is not available for heating and cooling. If available, the swimming pool water is heated
according to the times set in the swimming pool program.
Emergency mode If the heat pump can no longer function. The second heat generator (electric immersion heater, oil/gas
heating) covers the heating demand and DHW heating.
Which programs are available?
"MENU" key > "Programs"
For the individual programs, you can set when the heat pump will achieve the different set temperatures. If no times are stored, the
set comfort temperature applies.
If you are absent for prolonged periods of time on a regular basis, it makes sense to set the time programs. For example, the heat pump
does not have to heat the rooms to comfort temperature if you are not present.
With heating systems that are slow to respond, such as underfloor heating, it only makes sense to reduce the living space temperature
during longer absences (e.g. holiday). Changing the set temperatures may not affect the living space temperature for several hours.
Program Function
Heating program Within the selected times, the heat pump heats the rooms to comfort temperature.
DHW program Within the selected times, the heat pump heats the DHW to comfort temperature.
Cooling program Within the selected times, the heat pump cools the rooms to the set room temperature for cooling mode.
Party program For the selected period, the heat pump heats the rooms to comfort temperature.
Holiday program For the selected period, the heat pump heats the rooms and the DHW to the ECO temperature.
Especially in winter, energy can be saved by activating the holiday program and heating the rooms and
DHW to ECO temperature.
Pasteurisation program At the set interval (e.g. "3" for every 3 days), the heat pump heats the DHW cylinder to the set temperature
to enable pasteurisation.
DHW circulation pro- Within the selected times, the DHW circulation pump operates and distributes hot water to the draw-off
gram points.
Swimming pool pro- Within the selected times, the heat pump heats the swimming pool water to the set temperature.
gram
The required program settings are defined in the "Settings" menu (see additional sections).
8 | WPM www.stiebel-eltron.com