Teac IW-C5i Manual Del Usuario página 11

The Bluetooth equipment needs the pairing process for transmitting and
receiving signals.
1
Press and hold the STANDBY/ON switch on the RX-C10i for more
than three seconds to turn the unit on.
The RX-C10i starts searching for its pair. During this process the
STANDBY/ON button (blue) and the PAIRING button (red) flash rapidly.
2 During the RX-C10i searching for its pair, press and hold the
STANBY/ON switch on the TX-C5i to turn the unit on.
The TX-C5i starts searching for its pair. During this process the
STANDBY/ON button (blue) and the PAIRING button (red) flash rapidly.
If the pairing process is successful, the STANBY/ON buttons begin to
slowly flash in blue.
Listening to iPod nano 1
11