Teac IW-C5i Manual Del Usuario página 5

Read this before attempting any operations.
< The voltage supplied to the unit should match the voltage as printed on
the label. If you are in any doubt regarding this matter, consult an
electrician.
< Choose the installation location of your unit carefully. Avoid placing it in
direct sunlight or close to a source of heat. Also avoid locations subject to
vibrations and excessive dust, heat, cold or moisture.
< Do not place the unit on an amplifier/receiver.
< Do not open the cabinet as this might result in damage to the circuitry or
electrical shock. If a foreign object should get into the unit, contact your
dealer or service company.
< When removing the AC adapter plug from the wall outlet, always pull
directly on the adapter, never yank the cord.
< Do not attempt to clean the unit with chemical solvents as this might
damage the finish. Use a clean, dry cloth.
< Keep this manual in a safe place for future reference.
< Even if the unit is operated within the effective range, transmitting may
be impossible if there are any obstacles between the unit and the remote
control.
Do not operate near the metal object. During operation do not veil
completely with hand or clothes.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted
mild liquid soap. Be sure to remove any excess liquid completely. Do not
use thinner, benzine or alcohol as they may damage the surface of the
unit. Allow the surface of the unit to dry completely before using.
Before Using the Unit
5