SET UP & USE
IMPORTANT: Use only cold water - the
automatic brewing system has been designed
to work only with cold water.
CAUTION: This pod coffee maker makes
one fresh beverage at a time. You will need to
add fresh cold water each time you brew. This
unit does not store extra water in the water
reservoir. Do not overfill the water reservoir.
Maximum amount of cold water is 0.45L (15 oz).
While you may use any mug that fits in the pod
coffee maker, ensure that the amount of cold
water added into the water reservoir is no more
than 0.45L (15 oz) and does not exceed the
volume of the mug.
IMPORTANT: Do not operate the pod coffee maker if the lid does not close
completely. If the lid does not stay locked down, check to ensure that the
removable capsule basket is inserted correctly.
6. Plug the unit into a working 120 volt 60 Hz AC-only outlet.
7. Press the start button. The button will illuminate, indicating that your pod
coffee maker has begun heating the water to prepare to brew. In a few
minutes, your pod coffee maker will be finished brewing fresh coffee.
8. Once the brewing cycle has completed, the pod coffee maker will
automatically turn itself off. You will know that the brewing cycle is over when
the illuminated start button turns off. Unplug the power cord when not using
the pod coffee maker.
WARNING:
•
To avoid risk of personal injury or damage to property, do not remove mug
from pod coffee maker until the light turns off indicating that the brew cycle is
complete.
•
NEVER lift lid during brewing cycle as hot water will spray from the piercing
needle and scalding may occur.
Page 9