Hilti UH 700 Manual De Instrucciones Original página 25

3 Description
3.1 Product overview
3.2 Intended use
The product is a hand-held, corded hammer drill. It is suitable for hammer drilling, drilling, screwdriving and,
under certain circumstances, stirring/mixing.
3.3 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.4 Items supplied
Hammer drill, side handle, depth gauge, chuck key, dust cap, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.5 Application with hammer action
Application with hammer action
Hammer drilling in masonry
3.6 Applications without hammer action
Applications
Drilling in metal
Drilling in wood
*273761*
1
Tool type
Cylindrical-shank drill
bits
with carbide cutting
edge
Tool type
Cylindrical-shank drill
bits
Stepped drill bits
Twist drill bits
Forstner bits
Hole saws
273761
Drill chuck (keyless chuck or keyed chuck)
@
Side handle
;
sleeve
=
Depth gauge
%
Locking screw for depth gauge
&
Function selector switch
(
Forward / reverse switch
)
Control switch with electronic speed control
+
Lock button for continuous operation
§
Supply cord
/
Dimensions
1st gear/2nd gear
—
Dimensions
1st gear
≤ 13 mm
≤ 35 mm
≤ 30 mm
≤ 45 mm
≤ 80 mm
Dimensions, ham-
mer drilling
≤ 16 mm
Dimensions
2nd gear
1.5 mm ... 8 mm
≤ 8 mm
≤ 30 mm
≤ 40 mm
≤ 40 mm
English 17