Aerian SPOTCLEAN1500 Manual De Instrucciones página 74

Cleaning the brush and crevice tools
Front cover
After cleaning, attach the front cover back to the brush tool.
Align the holes on the cover with the pins of the brush tool.
Press the front cover until it clicks in place.
Holes
Pins
Empty the spray nozzle
if blocked.
Disconnect cleaning tool from hose
grip by pushing down on button lock
and pulling off.
Open it with finger
and then remove it.
72
Remove the front cover
and rinse with clean
water.
Click in place
Check the hose for breakage
and leakage.
EN