Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning of inlet air sponge and filtering sponge
Rinse the inlet air sponge and filtering sponge after use, and
replace them if they are damaged.
Inlet air sponge
(side of dirty water tank)
Air dry after cleaning.
Install the parts back to the machine after maintenance.
After maintenance, store the appliance in a dry place at room
temperature, and avoid direct sunlight.
TROUBLESHOOTING
Problem
The appliance does not
work after turning it on.
Reduced spray or no spray
Reduced suction or no
suction
Filtering sponge
(side of clean water/solution tank)
Possible causes
The plug is not properly connected
and loose, resulting in poor contact.
On/Off button is not pressed.
Overheats occurs and the thermal
protector operates.
Spray nozzle is clogged.
On/Off button is not pressed.
The dirty water tank is full, causing
the floating ball to work.
The hose is abnormal.
Dirty water tank is improperly
seated onto base.
The inlet air sponge is blocked .
73
Solution
Turn off the power and plug it
again.
Press the On/Off button.
Refer to the instructions for
thermal protector.
Rinse spray nozzle with clean
water.
Press the On/Offbutton.
Empty dirty water tank.
Check the hose for cracks,
breakage and clogs.
Remove dirty water tank and
reseat onto base properly.
Clean or replace the sponge.
EN
Publicidad
