Publicidad
Idiomas disponibles
Idiomas disponibles
The monitor will store your settings and exit the setting mode when no
key is pressed in approximate 10 seconds.
Use the acoustic CO
(for the high CO
Press the
on, the
When the measured CO
and the
continuously. The beep sound will accelerate when the measured CO
level exceeds more over the set alert level.
If this happens, please open the windows, adjust the air ventilation and
avoid too many people gathering together to improve the air quality of
your environment.
Press the
icon disappears. The
high alert.
Setting of the maximum and minimum memory duration of CO
Press and hold the
and flashes.
Press the
mostly 12-hour intervals from "1HR" to "96HR".
Press and hold the
level display.
Your monitor will start to record the CO
after you set the duration. It will auto-reset the memory in accordance
with the set duration.
Note:
alarm
2
alert)
2
button once to turn on the CO
icon appears on the display.
2
icon flash and an audible beep sound will be given
button again to disable the CO
icon remains flashing if CO
button until the display shows "24Hr" (default)
or the
button set the MAX-MIN memory duration in
button to confirm and return to the current CO
reaches the set high alert level, both the
2
EN6
alarm. When the alarm is
2
voice alarm and the
2
exceeds the set
2
data when it is powered up or
2
values
2
2
Publicidad
