Technoline WL 1022 Manual De Instrucciones página 19


In around 20 minutes, the blinking will stop and the calibration is
completed. Your CO

Press the
active.
Changing the display brightness
Press the button multiple times to adjust the brightness of the display
int the order High-Low-Off.
Using the wall mounting hanger
For wall mount usage insert the enclosed metal hanger to the back of your
CO monitor as shown in the below graphic:
2
Troubleshooting
No display or functions
Check the USB/DC adaptor is properly connected.
Response time
Ensure the air flow channels at the back of the monitor are not blocked or
covered.
Manual calibration
monitor will return to normal CO
2
button once to stop the manual calibration while it is
Metal Hanger
EN8
display mode.
2