6. AFTER SALES SERVICE
Before make use of the after sales Service, please check the
following table:
Fault
Light on, but
motor does
not work
Light does not
work, motor
does not work
Oil leakage
Lights not
working
Insufficient
suction
The Cooker
hood inclines
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Power cord loose or
disconnected
One way valve and the outlet
are not tightly sealed
Leakage from the connection
of chimney and cover
Broken bulbs
The distance between the
cooker hood and the gas top is
too far
The fixing screw not tight
enough
Solution
Select a fan switch position
Contact service center
Contact service center
Reset/Replace fuses
Refit cord to power outlet
Switch power outlet on
Take down the one way valve
and seal with sealant
Take chimney down and seal
Replace the bulbs
Refit the cooker hood to the
correct distance
Tighten the hanging screw and
make it horizontal
28