Audi electric kick scooter Manual Del Usuario página 74

Charging the scooter
1. Connect the charger to the electric socket
2. Untwist the protective cap of the charging socket (K). The charging socket (K) on the
scooter is located on the front right-hand side of the footboard
3. With the kick scooter switched off, connect the charging cable to the scooter
K
4. The LED on the power supply unit turns red when charging has started
5. The LED on the power supply unit turns green when charging is complete
6. Disconnect the charging cable from the kick scooter
7. Close the protective cap to protect the charging socket from splashes of water
8. Disconnect the charger from the mains
Note
Before using the kick scooter for the first time, the battery must be fully
charged with the power supply unit supplied. Close the charging port cap if
the kick scooter is not being charged.
74