Publicidad
Step 27
To insert the PRINTER SHELF (K) into your unit, tip the front of the SHELF down and drop the rollers on the SHELF behind
å
the rollers on the unit. Lift the front of the SHELF up and slide it into the unit.
Push a CAM COVER (YY) onto each visible HIDDEN CAM.
å
Peel a BUMPER from the BUMPER CARD (XX) and stick it on the DOORS where it comes in contact with the
å
PRINTER SHELF (K).
We recommend using the SAFETY BRACKET (MM) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (JJJ)
å
into the right or left side of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (BBB) into a stud in your wall.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
MM
BLACK 9/16" LARGE HEAD SCREW
(1 used into the side of your unit)
YY
To cover HIDDEN CAMS
Page 32
BBB
JJJ
(16 used)
30 lbs.
20 lbs.
5 lbs.
K
30 lbs.
50 lbs.
413092
20 lbs.
25 lbs.
25 lbs.
XX
www.sauder.com/services
Publicidad
