Silverline 951855 Traducción Del Manual Original página 12

GB
Troubleshooting
Problem
Angle grinder does not start when ON/OFF Trigger Switch
(6) is depressed
Grinding/cutting Disc is off centre/vibrating eccentrically
12
Possible cause
No power
Trigger Lock (7) not operated
Tool defective
Grinding/cutting Disc (10) is overly worn
Deformed Grinding/cutting Disc
Grinding/cutting Disc not fitted correctly
Solution
Check mains connection
See 'Switching ON & OFF' section and Fig. III
Contact your dealer or authorised Silverline service centre
Turn 'OFF' the grinder, remove and replace the Disc
Turn 'OFF' the grinder, remove and replace the Disc
Turn 'OFF' the grinder and refit the Disc