Publicidad
Idiomas disponibles
Idiomas disponibles
Important!
The surface body temperature differs from the
internal body temperature. To obtain the inter-
nal temperature, always use the "BODY"mode.
Please
make
sure
to
select
"SURFACE
TEMP"mode for an external area reading.
5.In the switch on state, press "
" can open or
close the buzzer.
When the screen shows "ON", the buzzer ope-
ned.
When shows "OFF", buzzer closed.
6.Recalibration of device via the F4 MENU
The TEMPO EASY Non-contact infrared ther-
mometer factory-set. Depending on varous skin
types and thickness, there may be temperature
differences.
The F4 function will recalibrate and if you see a
difference in the reading ,you must recalibrate
the unit.
Instructions for recalibration :
In the switch on state, Press the "MODE" and
"°C/ °F" buttons at the same time for 3 seconds.
The screen will then display : "F4"
Press "MODE" to increases 0.1°C, press °C/ °F
to reduce 0.1°C.
Press "MEM" button to save the setting.
In the cases of seasonal or environmental
changes a verification and adjustment should be
carried out.
7. CHANGING THE BATTERIES
Display: when the LCD screen displays "Bat-
tery", the battery is used.
30
www.spengler.fr
Publicidad
