Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND STERILIZING
* For first time and before each use, you must disassemble, wash and
sterilize all the breast pump parts that come into contact with breast
milk.
* Never wash or sterilize the pump motor, this component does not come
into contact with your breast milk. You can wipe this part clean with a
soft cloth.
* Please use hot water/steam/sterilization pot for sterilization, temperature
shall not exceed 100 degrees.
* Drinking water is recommended to use for cleaning.
* Take care when cleaning the valve and silicone diaphragm, if it gets
damaged, your breast pump will not function properly.
* To clean the Silicone Valve, tub it gently between your fingers in warm
soapy water. Do not insert objects as this may cause damage.
ASSEMBLING
1. Put the Silicone Diaphragm into the
linker, and press it with your hands to
make the edges fasten tightly to
ensure a perfect seal.
2. Install the Silicone Valve into the bottom of the linker, make sure it
is installed in the correct direction.
03
Publicidad
