Coccolle Venti Manual De Instrucciones página 7

EN
8. Installation of the canopy support and headrest
As shown in picture 8, the canopy support is buckled to the back of the backrest,
attach it by
the round buckles, and then pull down the canopy support and buckle it in place;
After the canopy
support is installed, insert the headrest into the back of the backrest along the
dotted line.
9. Canopy Installation
Open the canopy as shown in picture 9 and picture 10.
10. Pushbar installation
Insert the push bar into the corresponding hole on the frame, as shown in
picture 11.
Use instructions
1.Unfolding the footrest
There is a footrest pedal under the frame, you may unfold it and use it while
your baby is sitting in the tricycle unable to reach for the pedals.
2.Backrest adjustment
As shown in picture 12, hold the buttons on both sides of the backrest to adjust
the angle of the backrest.
3.Seat rotation adjustment
Loosen the screw under the frame to turn around the seat. (picture 13)
Maintenance
To avoid risk of injury to your child, please check and maintain the tricycle
periodically.
1.Clean the tricycle with a wet cloth.
2.Check the tricycle bearings and add lubricants regularly.
3. Any loose screws should be tightened or replaced immediately.
4. Read the instructions carefully before the assembly.
7