Publicidad
Idiomas disponibles
Idiomas disponibles
TAPE RECORDER
General Operation
/
● (deck 1 only)
Playback
Set the function selector (10) to TAPE position.
Open the cassette door and insert the tape.
Close the cassette door and press
Adjust the volume (3) to the desired level.
Press
to pause playback.
Press
to stop playback.
Please note:
It is possible to playback cassettes in both cassette players, one after the other. Press
and then
for deck 2; the tape in deck 1 will start playback automatically after the tape in deck 2 has finished.
Recording
A. Recording From Tape (Deck 2 To Deck 1)
This unit enables you to duplicate a recorded tape to another tape. It is performed only one way from deck 2 (playback)
to deck 1 (recording).
Dubbing At Normal Speed
Set the function selector (10) to TAPE position and the dubbing button (6) to NOR.
Inset a recorded tape in deck 2 and a blank tape in deck 1.
Press
and then
Press
to start playback of deck 2, then release
Press
for deck 1 and
Dubbing At High Speed
This unit is equipped with a high speed dubbing system, which can save time during dubbing.
Set the dubbing button (6) to HI
When dubbing a recorded tape at high speed, a chattering sound may be heard. In this case set the volume control
to minimum level.
Do no set the dubbing button (6) to HI or NOR. position during dubbing, this may damage the tape.
B. Recording From Radio
Set the function selector (10) to TUNER position.
Tune into your desired station and insert a blank tape in deck 1.
Press
and
to start recording.
Press
and then
During AM recording some whistling noise may be heard during poor reception.
C. Recording From CD
Set the function selector (10) to CD position.
Insert a blank tape in deck 1.
Press
and then
Press once to stop all tape deck operation. Press again to open the cassette door.
Press to start fast forward or rewind.
Press
at the end of the cassette.
Press to start tape playback.
Press to pause tape playback. Press again to resume playback.
Press together with
to start playback.
and
for deck 1.
for deck 2 to stop recording.
position and follow the procedures as in "Dubbing At Normal Speed".
to stop recording.
and
. The recording function is now in standby mode.
to start recording.
for deck 1 to start dubbing.
EN-4
and
together for deck 1
position.
Publicidad
