Grouw 18037 Manual De Instrucciones página 27

Main components
1. Protective shield
2. Support grip
3. Safety switch
4. Release button
5. Rear handle
6. Cord and plug
7. Blade
8. On/off button
9. Cord holder
10. Opening for cord
Angling the handle
Press the release button (4) and turn the rear
handle (5) to the required angle. Let go of the
release button. Continue turning the handle
until it locks at the required angle when the
release button engages with an audible click.
Preparation
Make a loop in the extension cord and place
it � rmly in the opening (10) on the hedge
trimmer.
Hook the loop securely to the cord holder (9).
Pull on the extension cord so that the loop is
secure around the cord holder.
Connect the hedge trimmer plug to the
socket on the extension cord.
GB
27