NORAUTO 2262070 Instrucciones De Montaje página 57

wheels firmly before lifting the vehicle.
4 Lift the lever and simultaneously adjust the saddle to the desired height.
5 Then lower the lever and lock the safety lock in the teeth of the saddle.
WARNINGS
1 Read this instruction manual in its entirety and keep it for future
reference.
2 The vehicle must be secured to prevent it from rolling away.
3 Immediately support the lifted load with the axle stand.
4 The axle stands must be tested for full functionality before each use.
After the test, if you are not sure whether they are functional or if you
found signs of damage, the axle stands must not be used.
5 Do not use damaged axle stands.
6 Do not use on slopes.
7 Never exceed the stated carrying capacity of 2 t. Overloading can
damage the axle stands or impair their functionality, thereby jeopardizing
your safety!
8 Place the load in the centre of the saddle.
9 Making modifications will void the warranty and endanger the safety of
the user.
10 Only lift your vehicle in areas recommended by the vehicle manufacturer.
11 Use only on a hard and firm floor and surface.
12 Do not use more than one pair of axle stands.
13 Take special care when hoisting a three-wheeled vehicle or trailer.
14 The two parts of the axle stand must not be used separately from each
other.
MAINTENANCE, CLEANING AND STORAGE
1 Lubricate moving parts regularly with lubricating oil.
2 Remove dust and dirt from the axle stands with a slightly damp cloth or
a hand brush.
3 Do not use harsh cleaners or aggressive chemicals to clean the axle
stands.
4 Store the axle stands indoors in a dry place protected from dust, dirt
and extreme temperatures.
5 Store the axle stands out of reach of children.
At the end of their life, dispose of the products and their packaging via a
specialist waste management company.
DISPOSAL
Dispose of the jack at a recycling centre or a collection point in your city/
municipality.
EN
55