CONTROL PANEL:
- ON/OFF: Press once this button to turn on the device. Press again this button to turn OFF.
- TIMER: It can be set between 1 to 8 hours, increase by 1 hour intervals.
- MODE: Press this button to select desired wind mode, NORMAL-NATURE-SLEEP. The corresponding
mode indicator light will be displayed.
- SPEED: Press this button to select desired fan speed, LOW-MID-HIGH, in circle turns. The corresponding
air flow speed indicator light will be displayed.
- SWING: Press this button to start the swing function. the air will circulate from side to side horizontally,
providing wider air circulation. The swing indicator light comes on. Press again to turn off this function.
- COOL: Press once this button to start the evaporative cooling function. The corresponding indicator
light will be displayed.
Attention: The "Cool" function must be powered off when there is no water or water shortage in the water tank.
This way is to avoid damaging the water pump and assure its using span.
REMOTE CONTROL:
Remote control has the same functions as the unit control panel.
The remote control is powered by a lithium button cell battery (CR2025). If the remote
control stops responding, replace the battery according to the following instructions:
1. Turn the remote control and press tab A to the right.
2. Slide the battery tray B outwards.
3. Replace the battery with another battery of the same type, making sure that the
positive side is facing upwards.
Caution:
· Remove the battery if the remote control is not used for a long time.
· If the remote control does not work within a short distance of the appliance, replace the battery.
· Do not allow children to play with the remote control.
EN
10